Knowledgebase
Protecta Support Site > Help Desk > Knowledgebase

Ask a question:


AZT+ READY LED does not light up

Solution

The READY LED shall be green if the internal capacitor is charged and the trip circuit is continuous.

Note, that all three trip outputs shall be wired to a trip coil. If only one tripping coil is available (e.g. by medium voltage applications), all three trip outputs shall be paralleled to that coil. 

 
Was this article helpful? yes / no
Article details
Article ID: 31
Category: AZT+ products
Date added: 2019-11-06 13:58:27
Views: 34
Rating (Votes): Article not rated yet (0)

 
<< Go back

Copyright by Protecta LTD 2012-2015 - powered by HESK